Botho University BEng (Hons) in Electrical Engineering

Botho University BEng (Hons) in Electrical Engineering

BEng (Hons) in Electrical Engineering

Mode of Study

CAMPUS LEARNING

The Electrical Engineering programme at Botho University runs for five years plus a sixmonth sandwiched internship programme. There are eleven Sems, out of which the students will be expected to do an internship (Professional Practice) in one of the Sems.

There is a requirement for Electrical Engineers in the Botswana engineering industry. Local industries such as the Botswana Power Corporation (BPC), Botswana Telecommunication Corporation (BTC) and Morupule power station as well as many construction companies require the services of Electrical Engineers. Graduates can seek opportunities in international markets in the above mentioned areas of specialization.

Programme details: The programme consists of core (required) and elective modules as detailed below. Some modules may have pre-requisites (i.e. may require the student to pass another module or set of modules first). Some modules may be co-requisite (i.e. such modules are required to be taken together). The number at the end of the module in parenthesis indicates the credit load of the module. 1 credit is equal to 10 hours of learning (guided, in-class and independent combined); therefore a 10-credit module requires on average 100 hours of learning from the student.

Core modules:

  • C5 – MAT – 11: Mathematics 1 (20)
  • E5 – PH1 – 14: Physics 1 (10)
  • E5 – PL1 – 14: Physics 1 Laboratory (10)
  • E5 – GCH – 14: General Chemistry (10)
  • E5 – GCL – 14: General Chemistry Laboratory (10)
  • C5 – ICO – 11: Introduction to Computers (20)
  • E5 – PH2 – 14: Physics 2 (10)
  • E5 – PL2 – 14: Physics 2 Laboratory (10)
  • E5 – EM1 – 14: Engineering Mathematics 1(20)
  • D5 – CSS – 14: Communication & Study Skills (20)
  • C5 – CSA – 11: Computer System Architecture (20)
  • E5 – EM2 – 14: Engineering Mathematics 2 (20)
  • C6 – IPC – 11: Introduction to Programming using C++ (20)
  • E5 – FES – 14: Fundamentals of Energy systems (20)
  • E5 – EM3 – 14: Engineering Mathematics 3 (20)
  • E6 – EM4 – 14: Engineering Mathematics 4 (20 credits)
  • E6 – I EN – 14: Introduction to Engineering (20)
  • E6 – ECA – 14: Electrical circuit Analysis (10)
  • E6 – EAL – 14: Electrical circuit Analysis Laboratory (10)
  • E6 – ECI – 14: Electronic Circuits (10)
  • E6 – ECL – 14: Electronic Circuits Laboratory (10)
  • E6 – SAS – 14: Signals and Systems (20)
  • E6 – EMW – 14: Electromagnetism & Waves (20)
  • E7 – ANE – 14: Analogue electronics (10)
See also  Directorate on Corruption and Economic Crime (dcec) Botswana
  • E7 – AEL – 14: Analogue electronics Laboratory (10)
  • E7 – LCS – 14: Linear Control Systems (20)
  • E7 – DIE – 14: Digital Electronics (10)
  • E7 – DEL – 14: Digital Electronics Laboratory (10)
  • E7 – ELM – 14: Electrical Machines (10)
  • E7 – EL1 – 14: Electrical Machinery Laboratory 1 (10)
  • E7 – EMA – 14: Engineering Management (20)
  • E7 – PPR – 14: Professional Practice (60)
  • E8 – POE – 14: Power Electronics (10)
  • E8 – PEL – 14: Power Electronics Laboratory (10)
  • E8 – EPS – 14: Electrical Power systems (10)
  • E8 – EL2 – 14: Electrical Machinery Laboratory 2 (10)
  • E8 – UEE – 14: Utilization of Electrical Energy (20)
  • B8 – ENT – 13: Essentials of Entrepreneurship (20)
  • E8 – PRO – 14: Project (20)

Elective modules:

  • Select one from the following:
    • E7 – OCS – 14: Optical Communication Systems (20)
    • E7 – MIC – 14: Microprocessors (20)
    • E7 – IIN – 14: Industrial Instrumentation (20)
  • Select one from the following:
    • E8 – RES – 14: Real Time Embeded Systems (20)
    • E8 – ESY – 14: Embedded systems (20)

Recommended full-time study path (5½ years):

YearSemModuleCredits
Year 1Sem 1C5-MAT-11: Mathematics 120
E5-PHY1-14: Physics-I10
E5-PL1-14: Physics-I Laboratory10
E5-GCH-14: General Chemistry10
E5-GCL-14: General Chemistry Laboratory10
Sem 2C5-ICO-14: Introduction to Computers20
E5-PHY2-14: Physics-II10
E5-PL2-14: Physics-II Laboratory10
E5-EM1-14: Engineering Mathematics-I20
Year 2Sem 3D5-CSS-14: Communication & Study Skills20
C5-CSA-11: Computer Systems Architecture20
E5-EM2-14: Engineering Mathematics-II20
Sem 4C6-IPC-11: Introduction to Programming using C++20
E5-FES-14: Fundamentals of Energy systems20
E5-EM3-14: Engineering Mathematics-III20
Year 3Sem 5E6-EM4-14: Engineering Mathematics-IV20
E6-IEN-14: Introduction to Engineering20
E6-ECA-14: Electrical circuit Analysis10
E6-EAL-14: Electrical circuit Analysis Laboratory10
Sem 6E6-ECI-14: Electronic Circuits10
E6-ECL-14: Electronic Circuits Laboratory10
E6-SAS-14: Signals and Systems20
E6-EMW-14: Electromagnetism & Waves20
Year 4Sem 7E7-ANE-14: Analogue electronics10
E7-AEL-14: Analogue electronics Laboratory10
E7-LCS-14: Linear Control Systems20
E7-DIE-14: Digital Electronics10
E7-DEL-14: Digital Electronics Laboratory10
Sem 8E7-ELM-14: Electrical Machines10
E7-EL1-14: Electrical Machinery Laboratory-I10
E7-EMA-14: Engineering Management20
Elective- I (Select one from below)
E7-OCS-14: Optical Communication Systems20
E7-MIC-14: Microprocessors20
E7-IIN-14: Industrial Instrumentation20
Year 5Sem 9E7-PPR-14: Professional Practice60
Sem 10E8-POE-14: Power Electronics10
E8-PELL-14: Power Electronics Laboratory10
E8- EPS-14: Electrical Power systems10
E8-EL2-14: Electrical Machinery Laboratory-II10
Elective –II (Select one from below)
E8-RES-14: Real Time Systems20
E8-ESY-14: Embedded systems20
Year 6Sem 11E8-UEE-14: Utilization of Electrical Energy20
B8- ENT-13: Essential of Entrepreneurship20
E8-PRO-14: Project20
See also  Botho University Botswana Admissions

Admissions Criteria

1) Applicants are expected to have successfully completed secondary schooling. The typical entry requirement is BGCSE or IGCSE (in Botswana), LGCSE (in Lesotho) or other equivalent secondary school qualification. BGCSE or IGCSE (in Botswana), LGCSE (in Lesotho) candidates are required to achieve a minimum grade of ‘D’ in five subjects.

2) The applicant should have passed in a minimum of five BGCSE or equivalent subjects including English, Mathematics and either one of Physics, Double Sciences, or PC (Physics and Chemistry).

3) Applicants in possession of a Diploma or Higher Diploma in related field will be given exemptions based on the credit point equivalency

4) For enquiries and more information please visit our General Admissions Information page

See Also: Admission For Universities And Colleges In Botswana

                  : List Of Universities And Colleges In Botswana